Das Problem wird auch im Esato Forum diskutiert. Offenbar hat ein Teilnehmer nun eine Lösung gefunden (keine Gewähr, nicht von mit getestet!):
---------------------------------
colas
Joined: Jan 25, 2004
Posts: 4
From: France
----------------------------------
Posted: 2004-01-29 23:45
----------------------------------
TA- DA!!! I FIXED IT !!!
The solution: you need to connect pins 1 & 2 of the flip contactor. When you remove the flip, you see on the phone 6 pins, let's number them:
4 5 6
1 2 3
Just connect electrically 1 & 2. I used a hard disk jumper,
which stays in place as the cover keeps it from getting out.
How I found this: I wanted to "emulate" what hapenned electrically when the flip was on. So I guess that to "sense" that the flip was on, even without keys pressed, some of the 6 contacts on the flips should be connected.
By testing them with a meter, I found that 1 & 2 and 4 & 5 where connected. So I just connected 4 &5 (didnt work), and 1&2 (worked!).
There should be no danger in this, as the flip naturally
connects 1&2. This hack will allow us to wait for a firmware solution... (uninstalling tracker did nothing)
PS: When I turned on the phone, before fixing it, there was actually some chance (1/3 ?) that the "in" worked, but never the "away".
http://www.esato.com/board/vie…hp?topic=49339#post648754
----------------------------------
Grüße
unikon