TCP options string = 020405ac0103030101010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 65536
RWIN Scaling (RFC1323) = 1 bits (scale factor of 2)
Unscaled Receive Window = 32768
RWIN is not fully optimized (even though it is a comparatively large number). The unscaled RWIN value is lower than it should be. Also, RWIN being close to and above 65535 does not justify the header overhead of enabling TCP Options. You might want to use one of the recommended RWIN values below.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2621.44 kbps (327.68 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.576 kbps (131.072 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 121 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
sind meine werte, ich komme bei downloads nicht über 650kb/s, würde sich das mit dem tool verbessern?
...